East Ender Strainer Board 2M Kit
East Ender Strainer Board 2M Kit
The easiest and quickest way to strain hinge lock and net fencing wire.
- Very easy to get on and off the wire
- No hammer required
- Can easily be adjusted for slopes and angles
- Won't break or damage the wire
- Will not slip!
This kit includes:
- 2 x 1 Metre strainer boards
- 15 Jack the Grippers (spring loaded wire grippers)
- 4 M6 stainless steel Quick Links
- 1 foot plate
- 5 M10 x 25 mm coach bolt and wing nut
Bit like going from the old hand rammer to the air rammer
You think how much easier is this
Same with the strainer board , makes fencing a lot more enjoyable
Simple an easy to use
Thanks for the review Ian, There are people who do enjoy fencing but not many. Cheers, Ian
I bought my kit from Australia. Delivered to Ontario Canada. Delivered in 7 days. There’s nothing like it here in Canada. It’s the best wire strainer on the market.
Thank you for your efficient service and knowledge.
Thanks for yor comment Damien, greatly apeciated, Ian
East Ender Strainer Plate 1M
I used it with the Strainer X winch instead of the ratchets that come with the pack (2 chains running running from the winch to the strainenumber ofr board) and it worked well, the trick being consistent tension along the strainer board and that is easy given the 12 holes available. And it could be that 2 winches would over-complicate things. Overall, the wish list must be the West Ender and its foot plus 2 ratchets especially if 2m but so far I'm doing well enough to avoid buying the in-line strainers to patch up problems from using the strainer board, which may not be a bad result for a first time fencer.
Thanks for your reviews James, much appreciated.
Let customers speak for us
from 194 reviewsFence magician has cut an hour off or day splicing and terminating fabric. That time saved allows us to install more fence which has an impact on our bottom line. Great tool my crew loves it. It’s a must have in your toolbox.
Good product, swift delivery
Best strainers in our kit
I bought a whites rural strainer board. I got 3 strains out of it before it started to slip on the galmax netting. It gave me the sh!ts so decided to try a wireman board. Spoke to Ian (great guy easy to talk to) and picked his brain and asked about other companies stuff in comparison to wireman. Was also happy that he choose not to rubbish talk other companies to get a sale. Went away and called back a couple days later and purchased the west ender. Best thing I did. Very happy with them and wireman’s professionalism. Highly recommended.
I only brought 3 .I tried using 1 on high tensile wire.but I gave it away to hard to handle. Will try on some softer wire.
Over the last few weeks I've been setting up high-tensile fences and repairing quite a few strings of barbed wire. Using the StraineX strainer has been enjoyable compared to the run-of-the-mill strainers. It is FAR easier to set the grippers (this is a huge time saver for me) and the longer chain makes straining to the end post simple.
This is a Super easy to use strainer! First strainer I've used and fence I've put up but man this makes it easy. Gauge takes out all the guess work and the small increment movement of the ratchet helps get the strain spot on. Very happy as I've got kilometres of fencing to go and I'm not going to be fighting the strainer
Strained JTG works well. Used fixing fence on old barb wire. Well built wire clamps hold tight and do not bruise the wire. A little heavy but not a problem. Also used as come along replacing old cable type Power Pull.Might be useful during calving season.
Crinkler
Great product & fast shipping
I think I should of got the clamp type gauge when you tension the wire then release it you don’t know the tension. Don’t get me wrong it works ok just chose the wrong gauge.
We've been using a West Ender strainer board for quite a while and recently bought a second. Both the older and new units are excellent. We have other strainer boards also, but always grab a West Ender as first choice because it's easier to use in several respects (putting on and removing once the job is done, gripping the wire, allows for the release of individual line wires which is occasionally an advantage) and importantly two units can be joined together for use on 1.8m high mesh. We no longer have slipping issues. The second version is an improvement because the orientation on the handles on the grippers is more user friendly - well done designers! We often use a couple of consecutive strainer boards for going around bends in a fence line without the need to cut the mesh and tie off twice. Very solidly built and great all round!
Great quality made tools with exceptional customer service.. highly recommend
Absolute brilliant worked perfectly
Money well spent
Great bit of kit. I was never comfortable using my Strainrite tensioner - the clamp that grips the wire is prone to slip, and I’ve had high tensile wire break loose under tension and fly past my face more times than I care to mention. Serious injury avoided luckily.
The StraineX kit is infinitely better - the grip is spot-on and the ratchet allows precise tensioning. Many times with the traditional strainers I’d struggle to get the correct tension - with the StraineX it’s really easy. Thoroughly recommend this tool.