Wireman
DeBarber Barb Remover
DeBarber Barb Remover
Couldn't load pickup availability
1.5 mm Barb Wire* (Gaucho) SS Barb Removal Tool.
For use when:
- Joining barbed wire
- Using GRIPPLES or crimps
- When using barbed wire on CLIPEX fence posts
* Note - Please be aware that this tool will not remove barbs from IOWA or barbed wire that has the barbs wound between the wire strands. To remove barbs from 1.8 - 2.5 mm Barbed wire CLICK HERE for the Mark II IOWA DeBarber
Better for this task than anything Ive used before
Yeah not for me guys. I have Wireman strainers & they're amongst the best I've used. Been fencing with barbed wire for >40 years, and my wife pestered me into trying a barb remover. Dunno if its' just me. or the Waratah long life 2.0mm barb, but I've had very little success with it. I saw mixed reviews of these things online, so I wasn't too surprised but yeah. It's not for me anyway.
Great product. I have been using it now for over a month and it has saved me so much time. Once you get the hang of it you just fly through debarbing process. since dad passed away the fencing had been run down on the farm and i use this on every repair job. I Will buy a second one as a back up. I rate this product highly.
Very awkward to use, barbs dont fit in
Hi Ian
i just love all your fencing tools and tips
However the Debarber didn't full fill my expectations
This due however as the NZ barb is on a 45 Deg or less to line of wire
so barb tends to squash flat rather than untwist
No regrets on purchase and will try on different makes of barb
please let me know if i can demonstrate or help in your NZ market
Thanks again Rob
G'day Rob,
Thanks for your message. Apologies for the delay in responing to your feedback. Would greatly apreciate it if you could send me a picture of the barb in question to sales@wireman.com.au. I was in NZ last year for Mystery Creek and we are looking to make another visit next year. We will let you know when our itinery is confirmed. Regards, Ian
- 5 stars: 20 (71%)
- 4 stars: 3 (11%)
- 3 stars: 3 (11%)
- 2 stars: 2 (7%)
- 1 star: 0 (0%)
Better for this task than anything Ive used before
Yeah not for me guys. I have Wireman strainers & they're amongst the best I've used. Been fencing with barbed wire for >40 years, and my wife pestered me into trying a barb remover. Dunno if its' just me. or the Waratah long life 2.0mm barb, but I've had very little success with it. I saw mixed reviews of these things online, so I wasn't too surprised but yeah. It's not for me anyway.
Great product. I have been using it now for over a month and it has saved me so much time. Once you get the hang of it you just fly through debarbing process. since dad passed away the fencing had been run down on the farm and i use this on every repair job. I Will buy a second one as a back up. I rate this product highly.
Very awkward to use, barbs dont fit in
Hi Ian
i just love all your fencing tools and tips
However the Debarber didn't full fill my expectations
This due however as the NZ barb is on a 45 Deg or less to line of wire
so barb tends to squash flat rather than untwist
No regrets on purchase and will try on different makes of barb
please let me know if i can demonstrate or help in your NZ market
Thanks again Rob
G'day Rob,
Thanks for your message. Apologies for the delay in responing to your feedback. Would greatly apreciate it if you could send me a picture of the barb in question to sales@wireman.com.au. I was in NZ last year for Mystery Creek and we are looking to make another visit next year. We will let you know when our itinery is confirmed. Regards, Ian
Have had success on normal barb but high tensile barb is limited success which is majority of my work. I wonder if I bought the right product for the job. Any feedback is appreciated. Richard.
Practice makes perfect.. maybe in instructions need to say that you need to turn it around to do the other side. But hubby loves it
Love my debarber. Have found it easy to use and priced a more tidy finish to my work
Good product, swift delivery
The tool works well and is proving useful in the field. However, one of the screws that holds the 2 halves together has backed out and I am unable to find it. Maybe some thread locker could be added. Otherwise, the tool is great, and I will continue to use it for future jobs.
G'day Buddy,
Thanks for your review.
We will send you out a couple of replacent screws for the DeBarber.
Regards,
Ian
It didn't work as well as I hoped it would.
G'day Tommy,
Thanks for your feedback. The Debarber does take a little bit of getting used to and it is important to have the individual barbs standing up fairly straight before unwinding them. In our experience with practise it is much easier to use that pliers.
However, If you would lilke a full refund (including the psotage) for the Debarber please just send it to Wireman - PO Box 560, MILSONS POINT, NSW, 1565 AUSTRALIA and include you full name and address on or in the parcel.
Regards,
Ian
Used it for the first time today and I was pretty amazed at how quick and easy it was to use, highly recommend it, great investment
Great tool easy to use
Have some fencing to replace due to a
Fire and didn’t like the idea of tying knots in barb. Purchased this and after a few quick attempts it works incredibly well. Not put off by using barb now. Solidly built and well made, highly recommend well done guys
quick and easy saves time playing around with pliers
I really like the concept of a single tool instead of using two pliers to unwind the barbs. The tool also covers the barbs entirely while unwinding so you don't get stabbed. My only problem is that it gets jammed up occasionally, especially if the barbs are not consistent.
Easy to use and quiet simple operation.
I debarb when tieing off and specially at gateways etc otherwise you end up getting scratched as if you come across a wildcat.
Recommended.
I've been fixing fences for the last 45+ years and the DeBarber Mark 2 is simple, reliable, and worth every penny of having it shipped to Nashville, Tennessee. The weekend after I received it, I repaired a half mile of fence without a single cut, nick, or scratch. I'll have to keep an eye out for more ingenious tools from Australia.
Ian is a pleasure to work with, always starts wit Good Day.
Wireman User Gary
DeBarber Barb Remover
It's ok but could be better I think it needs slightly longer pins that unwind the barbs
Thanks for your review. When we first designed the DeBarber we did try to make the winding pin length longer but found that they clash together trapping the barb and stopping the handles from being turned.
bought the 2 units together in the kit, so much quicker and easy and less wear on the thumbs, def recommend
Quick and easy to use and works great 👍🏻
Needs getting used to it but it works and is much better than using other tools
Very useful
The debarber is a great tool to my tool box
There is a learning curve with the debarber. once you get the hang of it, it works great. The more you use it the easer it is to operate. It really simplifies putting up barbed wire.
Excellent
Let customers speak for us
from 394 reviews
Great tool thanks Ian
Love this add on. Really speeds up the fencing. fautless.
From the first time I used the Jack the Gripper rabbit ears I knew I was on a winner. they make it so easy to strain and join wire , no realigning or losing grip like the old ones. So easy to use, makes fencing almost enjoyable.
Great design easy and trouble free to use great purchase
Strainers
Arrived in Scotland within a week of ordering. Easy to use makes a tidy job. Can now leave anyone to tie off wire and the standard is consistent. Ideal for doing rylock wire even getting in the bottom smallest square with ease. Made a TikTok video thats generated alot of interest and now some french buggers stole my video. 😂 Some say it looks slower but in my eyes the tool will be a constant speed all day long where as my hands slow down and suffer after alot of tie offs. Overall delighted with it.
VICEMAN 1.5M
Hi to all .
Having both types of wire strainers/grippers the rabbit ear type are by far the easiest to use , I personally wouldn’t buy the normal type compared to the rabbit ear type simply for ease of use of the rabbit ear type
Very quick to apply the wires to the PickeX
Pole Star extenders.
Great product
Very happy with it
Better for this task than anything Ive used before
Top notch service and Product from Wireman once again!
Fast and easy way to fix gaps under fences. Good quality product and fantastic service from the team- always prompt responses
Recently made this purchase and extremely happy with product, so much easier to use then traditional strainers for a novice like me, grippers hold good too so no stuffing around when on your own trying to keep it all together, highly recommend. Also turned up quick and some after service was easy and very helpful, thanks 👍
It was great to talk to Ian. Worked the problem with no problem